Virtual Pinball Controller case and Lockbar

The Virtual Pinball Controller case and Lockbar by 3DPTronics is the CNC-machined plywood enclosure you need to build your own virtual pinball cabinet from scratch. The Virtual Pinball Controller case and Lockbar kit ships with all the holes pre-cut for buttons, plunger, service board, USB and power, so you skip the trickiest woodworking step and jump straight to wiring. Pair it with one of our electronics kits to get a complete cab in a weekend.

See also our wired VirtuaTilt, the Wireless VirtuaTilt, the VirtuaTilt Standalone Decals, the 3D-Printed Lockbar and the Pinscape Pico Expansion Boards. Learn more about the open-source firmware on the PinscapePico GitHub project.

The Virtual Pinball Controller case and Lockbar pack lets you build a real-feel virtual pinball cabinet without any CNC tools of your own. Each enclosure is cut from 10mm plywood for the sides and 15mm for the bottom, giving you a rigid box that handles solenoid kickback and accelerometer nudges without flexing. The lockbar is 3D-printed in ABS+ or PCTG  and snaps onto the front of the case. Box dimensions are 36cm x 24cm x 12cm - the same standard size as our complete VirtuaTilt builds, so existing decal kits and accessory mods all fit out of the box. Custom hole patterns and timber options are available on request - write us before ordering.

Virtual Pinball Controller case and Lockbar - Specifications:

- Plywood 10mm for sides and 15mm for bottom of the case

- CNC machined button holes, plunger hole, service button board slot, etc.

- 3D-printed lockbar (ABS+)

- Box dimensions: 36cm x 24cm x 12cm

Optional (bundle):

- Complete button set (6 chrome-plated microswitch buttons with LED + 4 Gold-Leaf buttons) - 10 buttons total

- Service button board (8 buttons) with connectors (male and female)