Voron 2.4 PIN MOD Shafts

Set of 5mm bearing hardened steel pins cut to length for use with the Voron V2.4 pin mod (Material: DIN100CR6; Hardness HRC58-62)

More infos about this mod are available here.

Sized as follows (14pcs total):

6 x 28mm

2 x 30mm

4 x 40mm

2 x 43mm

Optional: for Ramalama Front Idlers mod or Beefy Front Idlers mod the 2x43mm pins can be replaced by 2x18mm pins.

 4 x F695-2RS bearings can be added for Ramalama mod or Beefy mod.  Bearings are already tested to fit 18mm pins.

NOTE: Pins diameter is 4.94mm-4.96mm for all pins. We don't take any responsibility if they don't fit your bearings. Please check your bearings diameters before buy.