GE5C Spherical Z-Joint MOD for Voron 2.4

GE5C allows the connection between the gantry and vertical rails to pivot freely and so eliminates any binding. Stock Z-mounting blocks rely on the M5 bolt being a little loose, so the gantry can tilt for QGL purposes. GE5C instead allows the bolt to be fully tightened through the inner part of the spherical bearings to the gantry itself, which has zero play in it. As result you will achieve less resonances and more acceleration.

More infos about GE5C mod are avalable here.

NOTE: thinner lower z-belt clamps are needed to apply this mod.  STL is available here

Included in the kit:

(4)  ABS+ printed Z-Joints (you can choose between 16mm or 20mm version)

(4)  GE5C Spherical Bearings

(16) M3x16 or M3x20 SHCS screw (depends on the Z-Joints you choose)

(4)  M5x20 BHCS screws

(4)  M5x1mm spacer